 |
PEM/SPE Electrolysis
1 years
5 years
DC12V /8A
550ML
150ml/Min
400mm×350 mm×180mm
Al-Mg alloy + Food grade ABS
Enjoy Your First Trial Of Hydrogen Life
Please read this manual carefully before using the product.
This product is not a medical device. Always follow your doctor's medical advice.
Thank you for choosing our hydrogen inhalation machine.
Note: There is an oxygen outlet in the pure water inlet, and no sealing gasket in this part. When carrying it around, please make sure no water is in the inner tank to avoid water leaking from the oxygen outlet.
Hydrogen purity 99.99% Smart indicator Safety setting Timing setting Low water indicating
TDS smart detection Suitable forall people SPE technology Hydrogen flow rate: 150ml per minute Low noise
Step 1: Open the water input lid, fill in pure water (please make sure to use pure water or distilled water with TDS < 5 ppm).
Step 2: For initial use, please make sure the water is full.
Step 3: Connect the power supply and inhalation tube to the machine.
Step 4: Press the front power button to start the machine.
Note: There is a pressure-holding valve in the hydrogen outlet. When the inhalation tube is unplugged during operation, the machine will sound a “beep”. There is no sound after the inhalation tube is inserted. Do not cover the hydrogen outlet during use.
l Press the ON/OFF button once to start the machine. It will work for 1 hour and stop automatically.
l During the machine’s working, if press the ON/OFF button once, the working timing is set to 2 hours; press twice, the working timing is set to 3 hours; press three times, the machine stops.
l When the machine is working, you can stop the machine by pressing the ON/OFF button and hold for 3 seconds.
To ensure the normal operation of the device, please use distilled water or pure water with TDS < 5 ppm.
l Do not fill tap water into the machine.
l Do not fill domestic purified water into the machine.
l Do not fill mineral water or natural water into the machine.
Failures caused by using improper water sources are not covered by the warranty.
Product Name | Portable Multifunctional Hydrogen Generating Machine |
Model No. | EHM-H150-T |
Size | 120×120×190mm |
Net Weight | 1.6kg |
Function | Hydrogen Generating |
Hydrogen Purity | 99.9% |
Water Tank Volume | 550ml |
Input Voltage | DC12V/8A |
Rating Power | 80W |
Hydrogen Output Rate | 150ml/min |
l When the machine works for more than 1 week, it is recommended to drain out the water fully and replace with new water.
l When the machine won’t be used for over 1 week or during transportation, please drain the water completely.
l When the water quality is poor, output hydrogen may reduce, and the pipe may be blocked by the scale. It will result the machine’s service life shorter. Please use recommended water.
Please keep the machine out of the reach of children.
Do not disassemble, repair or modify the machine by yourself. If you need to repair it, please contact your dealer for help.
Do not put the machine in water or expose it to rain.
Do not put any object blocking the cooling port.
Do not put any water other than pure water or distilled water (TDS＜5) into the pure water tank.
Do not touch the interior of pure water tank.
Enjoy Your First Trial Of Hydrogen Life
Please read this manual carefully before using the product.
This product is not a medical device. Always follow your doctor's medical advice.
Thank you for choosing our hydrogen inhalation machine.
Note: There is an oxygen outlet in the pure water inlet, and no sealing gasket in this part. When carrying it around, please make sure no water is in the inner tank to avoid water leaking from the oxygen outlet.
Hydrogen purity 99.99% Smart indicator Safety setting Timing setting Low water indicating
TDS smart detection Suitable forall people SPE technology Hydrogen flow rate: 150ml per minute Low noise
Step 1: Open the water input lid, fill in pure water (please make sure to use pure water or distilled water with TDS < 5 ppm).
Step 2: For initial use, please make sure the water is full.
Step 3: Connect the power supply and inhalation tube to the machine.
Step 4: Press the front power button to start the machine.
Note: There is a pressure-holding valve in the hydrogen outlet. When the inhalation tube is unplugged during operation, the machine will sound a “beep”. There is no sound after the inhalation tube is inserted. Do not cover the hydrogen outlet during use.
l Press the ON/OFF button once to start the machine. It will work for 1 hour and stop automatically.
l During the machine’s working, if press the ON/OFF button once, the working timing is set to 2 hours; press twice, the working timing is set to 3 hours; press three times, the machine stops.
l When the machine is working, you can stop the machine by pressing the ON/OFF button and hold for 3 seconds.
To ensure the normal operation of the device, please use distilled water or pure water with TDS < 5 ppm.
l Do not fill tap water into the machine.
l Do not fill domestic purified water into the machine.
l Do not fill mineral water or natural water into the machine.
Failures caused by using improper water sources are not covered by the warranty.
Product Name | Portable Multifunctional Hydrogen Generating Machine |
Model No. | EHM-H150-T |
Size | 120×120×190mm |
Net Weight | 1.6kg |
Function | Hydrogen Generating |
Hydrogen Purity | 99.9% |
Water Tank Volume | 550ml |
Input Voltage | DC12V/8A |
Rating Power | 80W |
Hydrogen Output Rate | 150ml/min |
l When the machine works for more than 1 week, it is recommended to drain out the water fully and replace with new water.
l When the machine won’t be used for over 1 week or during transportation, please drain the water completely.
l When the water quality is poor, output hydrogen may reduce, and the pipe may be blocked by the scale. It will result the machine’s service life shorter. Please use recommended water.
Please keep the machine out of the reach of children.
Do not disassemble, repair or modify the machine by yourself. If you need to repair it, please contact your dealer for help.
Do not put the machine in water or expose it to rain.
Do not put any object blocking the cooling port.
Do not put any water other than pure water or distilled water (TDS＜5) into the pure water tank.
Do not touch the interior of pure water tank.
