Introduction to a Small household ionized water machine
You are here: Home » News » Introduction to a Small household ionized water machine

Introduction to a Small household ionized water machine

Views: 0    

Electrolytic water is a process of electrolysis without adding any substance on the basis of tap water through cathode and anode electrolytic plates at a specific current frequency: it changes the physical structure of water through the conversion of electric energy.As water pollution and secondary pollution increase, each milliliter of water contains tens of thousands of substances.Electrolysis itself is also a process of purifying water quality. Minerals and trace elements beneficial to human absorption are separated through ionic membrane; Acid radical ions are also separated from daily water, such as cleaning, astringent skin, acidic water for foot soaking and sterilization. In short, electrolysis physics changes the pH value and redox potential of water; And decompose to generate O2 and H2.Generally, there is no chemical reaction that can increase free energy, because water cannot be decomposed to produce O2 and H2 in natural state; However, if cathode and anode are added to water and current is applied, electrolysis reaction can take place according to Faraday's law.The anode material is usually insoluble platinum or graphite.The redox reaction at cathode and anode is as follows:

Cathode: 2H2O+2e -=2OH -+H2, reducing, alkaline ionized water. Small household ionized water machine-qinhuangwater


Anode: H2O=2H++1/2O2+2e - oxidizing, acidic ionic water.


After hydrogen and oxygen are generated on the cathode and anode surfaces,the water around the electrode will tend to be alkaline and acidic,and the redox potential will also change.Insert a porous semi permeable membrane between the two poles that can restrict the transfer of water,or an anion cation semi permeable membrane that can allow the anion and cation to selectively pass through,that is, it can collect alkaline water with high concentration of hydrogen and oxygen ions from the cathode and acidic water with high concentration of hydrogen ions and oxidation power from the anode.The name of electrolytic water generated from the cathode and anode is not uniform at present.Electrolytic acidic water is also called electrolytic oxidation water,and electrolytic alkaline water is electrolytic reduction water, In this paper, for the sake of unity, they are all called electrolytic alkaline water and electrolytic acidic water.

1. Application of electrolyzed water.

2. Alkaline ionized water (pH=9-11).

According to our usage suggestions: mainly raw drinks, hangover relieving,tea making,coffee, liquor blending, milk powder brewing, rice cooking, water for cooking, vegetable cleaning, plant watering, etc. It has obvious effect to improve the water quality.There are medical institutions in Japan that provide patients with alkaline ionized water instead of general drinking water.Its claimed efficacy includes the treatment of gastrointestinal discomfort,constipation,diarrhea, diabetes,hypertension,and improvement of physical fitness.Some scholars in Taiwan also pointed out that alkaline ionized water can eliminate free radical 4 in the human body (free radicals contain unstable unpaired electrons, too much of which can damage human lipids,and even cause cell mutation and cancer).In addition, NEC Company proposed to clean and cut the wafer surface with alkaline ionized water in 1994, which can effectively remove dust particles and reduce the use of chemicals and the cost of wastewater treatment compared with the commonly used ammonia water.

3. Acidic ionized water (pH=5-2.5):

Use of acidic ionized water: mainly used for cleaning, which is very clean without grease; Even on rainy overcast days, soaking clothes to dry, there is no smell. Brushing teeth, washing face and soaking feet can play a role in sterilization.

With the progress of science and technology, research and detection in recent years found that: because acidic electrolyzed water contains oxidation, it can oxidize the skin epidermis to help exfoliated dead cells renew the skin epidermis, and play a role in treating beriberi, scratches, etc. The main reason is that the positive potential is reduced under natural conditions. The electrons to be obtained or captured will seize the electrons on the bacteria, attack the bacterial active enzyme, and cause bacterial death.

Overall structure of electrolytic water machine

1. Filtering device:

Filter barrel device structure: PP cotton+PP cotton+activated carbon+hollow fiber (0.01 μ m)=direct drinking water standard.

After 30 years of reform and opening up, industrialization has developed at a high speed, leaving behind many environmental problems, especially the pollution of industrialized cities to varying degrees. The global environment is deteriorating, and our water sources, large and small rivers are polluted to varying degrees; More than 200 rivers have been seriously polluted, as well as tap water treatment technology and transmission pipelines.Secondary water pollution incidents have been reported frequently.Full explanation: water source pollution and secondary pollution are further aggravated.

2. Electrolysis device structure

Electrolytic device: titanium platinum alloy electrolyzer+imported ionic membrane+mold development+water quality control technology+electronic technology+high-tech testing instruments, etc.High tech products, specific current frequency setting, mold opening design,circuit board design and IC binding, selected materials and rejected unqualified materials; Imported ion-exchange membrane, titanium platinum alloy electrolytic cell device, etc.

 Pre filter part:

1) Primary filtration

PP cotton,the international standard 10 inch PP cotton is adopted.The PP cotton is made of high polymer materials and is produced by the general gradual diameter process.The fiber forms a three-dimensional microporous structure during the thermal bonding process.The microporous pore cap is distributed in a gradient from the inside to the outside.It integrates surface, deep layer, coarse and fine filtration, and can intercept impurities such as micro mud and rust in the water. We call it coarse filtration, or physical filtration.The replacement time of PP cotton is generally three to four months, because the water quality and water consumption are different in different regions.The specific replacement time depends on the local water quality and water consumption.The filter element can be properly cleaned in the place with dirty water.The inner ring barrel where the filter element is placed can be replaced when it turns yellow or turns black.

2) Secondary filtration

Coconut shell granular activated carbon bactericidal core;Coconut shell particle activated carbon sterilizing filter element will put the required activated carbon particles into a specially made plastic shell, use welding equipment to weld the end caps on both ends of the shell, and put non-woven fabric filter pieces at both ends of the shell to ensure that the carbon core will not drop carbon powder during use.Its function is to adsorb organic compounds such as different colors and odors, chlorine odor, chemical toxins, chloroform, etc. in water, and to disinfect and sterilize. The replacement time is 5-6 months, and the specific replacement time should be based on the local water quality and water consumption.

3) Tertiary filtration

Ultra strong molecular sieve filter element;

Molecular sieve, also known as zeolite or zeolite, is a crystalline aluminosilicate with regular and uniform pores in its crystal structure. The pore size is the order of magnitude of the molecular size. It only allows molecules with a diameter smaller than the pore size to enter, so it can sieve the molecules in the mixture according to their size. The resulting proteoglycan polymer twists and turns to form a microporous sieve structure, called molecular sieve. Molecular sieve only allows substances smaller than its micropore to pass through, and has a barrier effect on macromolecular substances and bacteria larger than its micropore. The replacement time is 5-6 months, and the specific replacement time should be based on the local water quality and water consumption.

Product   Name

Alkaline & Acidic Water Ionizer




Packing   Size & weight

42*22*39CM     5kg

Numbers   of Plates

11(default)/7   plates

Plate   size

7.9 *   4.3cm

Plates   Material

Titanium   with platinum coating


2.8~11(as   per local water quality)


+500~-800MV(as per local water quality)

PH   levels

2   Alkaline, 1 Hydrogen, 1 Purifed, 1 acid

Internal   filters

1   activated carbon filter


PH,   ORP, Flow rate, filter's life time, process,
  3.8" 7-coloured LCD

Auto   Cleaning function


Power   supply


pre-filters'usage   life

8-12months(as per local water quality)

Flow   rate


Water   supply method

Pipe   with running water

Water   flow controlling valve




Heating   system


Working   TDS range

50-1200   PPM

Mineral   port


Multi-power   plug


Touch   -control panel


Voice   prompt


Filters   usage life warning

Red LED   light is on. Screen image flashes.