Hydrogen water bottle provides people with healthy drinking water

Hydrogen water bottle provides people with healthy drinking water by ionizing H2O to produce hydrogen molecule H2. It is a simple and widely distributed element that exists in the natural environment. Modern medicine proves that hydrogen is an endogenous antioxidant substance, which has excellent effects on the elimination of free radicals.

Product parameters:

Product specifications: ￠66*220mm

Cup volume: 350ml

Material: food grade PP, high borosilicate glass 

Electrode plate: titanium platinum;

Voltage/power: 7.4V/3W

Hydrogen concentration: 800-1200ppb

Negative potential: -500mV--800mV

Battery life: Fully charged can produce about 8 cups of electrolyzed hydrogen water; Generation time: 1min/3min/5min

Applicable drinking water: purified water/cold water/nanofiltered water

First time using:

·Remove the protective cover of the base before use, and return the protective cover to the base if it is not used for a long time.

·It is recommended to clean the cup before use. It is recommended to wash with warm water about 40℃, do not soak in boiling water.

·Take out the charging cable and connect it to the charger of the mobile phone or the USB port of the computer for charging. The red light of the charging cable will flicker. After fully charged, the red light will go out and the blue light will indicate the charging is complete.

*For the safety of drinking water, it is recommended to use purified water, cold boiled water, and nanofiltered water for electrolysis.

*Use water temperature 5-40℃

Daily use :

* After pouring the drinking water into the cup, tap the electrolysis switch once to indicate that the machine is in standby mode;

* In the standby state, press the switch button again to enter the 1min electrolysis mode, and the electrolysis time is 1 minute;

* In the standby state, press the switch button twice to enter the 3min electrolysis mode, and the electrolysis time is 3 minutes;

* In the standby state, press the switch button 3 times to enter the 5min electrolysis mode, and the electrolysis time is 5 minutes;

* In the standby state, press the switch button 4 times in succession, and return to the standby state at this time;

* It will automatically shut down after 10 seconds of no operation in the standby state

* Light display description

Long blue light--standby state

Blue light flashing--electrolysis is working

Steady red light--no electricity

Red light flashing--charging

* The base contains electronic devices, please do not expose the entire base to water or splash it;

* Take out the protective cover of the base before use, and return the protective cover to the base if it is not used for a long time. After filling the drinking water, please carefully check whether the cup body and the base will seep water; because hydrogen will produce a little pressure and push, please tighten the cup body and base when there is water seepage during electrolysis. It is recommended to place the cup on the table and open the upper lid during electrolysis to avoid the risk of other items being soaked by water seepage.

* Any design changes made to this product without the permission of the original manufacturer, the original manufacturer will not be responsible for guaranteeing its original function

* This product should be kept away from fire and heat sources. Do not expose the base to direct sunlight to avoid circuit failure.

* Please do not use liquids other than pure water/nanofiltered water/cold boiled water for electrolysis; so as not to damage the function of the electrolytic plate.

Maintenance items:

* The upper cover and bottle body can be cleaned with neutral detergent.

* The base can be wiped gently with a damp cloth. After long-term use, you can pour warm water and citric acid into the cup, shake to wash, then pour out the citric acid water, and finally add pure water or nanofiltered water to clean it.

After-sales service policy

•From the date of purchase to the 15th working day, if the product has a performance failure that is not artificially damaged, it will be determined by the after-sales service center and you can choose to repair or replace it free of charge.

• Within 12 months from the date of purchase, if the product host has a performance failure that is not artificially damaged, it will be tested by the after-sales service center to determine that it can provide free warranty services.

• If the charging cable has a performance failure that is not artificially damaged, a new charging cable can be provided free of charge during the warranty period.

• When the product you purchased has a performance failure, the user needs to feedback the failure through the customer service to determine the failure, and then send the product back.

• If one of the following conditions is met, the after-sales service center will implement reasonable repair charges if it is not covered by the warranty.

1. The validity period of the three packs has expired.

2. There is no warranty certificate and valid invoice, except those that can prove that the product is within the validity period of the warranty certificate, the warranty certificate does not match the product identification or the warranty certificate has been altered.

3. Failure to use, maintain, and maintain the product in accordance with the instructions for use, resulting in damage, or unauthorized disassembly, repair, or modification of the system software, resulting in damage or abnormal functions.

4. Soaking in water, breaking or burning the circuit board.

5. The surface of the product such as the shell caused by the use process, except for the shell cracks caused by the structure or material factors.