 |
| Product Name | Alkaline drink water production water electrolysis cell for family using |
| Shell Materials | Food Grade ABS |
| Water outlet index | pH 7.5-8.5 |
| Water capacity | 240L/h |
| Power range | 0~220W |
| Power factor | 0.9 |
| Input current | 0~6 A |
| Input voltage | DC, 0~36V |
| Outlet pipe | 10 mm |
| Inlet pipe | 10 mm |
The electrolyzer consists of many cells.Each cell consists of cathode pool,which are separated by the membrane.The electrolyte will circle through cathode pool and anode pool with circle pump. Cells are connected by conductors.or coppers. The electrolyte and membrane will conduct between cathode pool and anode with series mode.Oxidation will happen at the anode with oxidation products and deoxidation will happen at the cathode with deoxidation products.
Qinhuang is professional manufacture for electrolytic cell. We have 3 types hot cell Electrolyzer for alkaline drink water.
Product usage introduction
1, water requirements: municipal pipe network tap water
A, conductivity <80-120us/cm;
B, hardness ≤5 mg/L;
C, water pressure 0.1-0.2mpa;
D, water intake: 180L/H
2. Technical parameters
A, voltage B, current 2-4A
C, PH>7.5;
D, water yield ratio (acid water and alkali water) 1:1-1:4
3. Method of use
A, vertical installation, inlet down.
B. The other two outlets are respectively drawn out with hoses, one for alkaline water (drinking water) and the other for acidic
water.
C. Connect the positive and negative electrodes of the dc power supply to the two electrodes of the electrolytic cell as per the
upper negative and the lower positive
| Product Name | Alkaline drink water production water electrolysis cell for family using |
| Shell Materials | Food Grade ABS |
| Water outlet index | pH 7.5-8.5 |
| Water capacity | 240L/h |
| Power range | 0~220W |
| Power factor | 0.9 |
| Input current | 0~6 A |
| Input voltage | DC, 0~36V |
| Outlet pipe | 10 mm |
| Inlet pipe | 10 mm |
The electrolyzer consists of many cells.Each cell consists of cathode pool,which are separated by the membrane.The electrolyte will circle through cathode pool and anode pool with circle pump. Cells are connected by conductors.or coppers. The electrolyte and membrane will conduct between cathode pool and anode with series mode.Oxidation will happen at the anode with oxidation products and deoxidation will happen at the cathode with deoxidation products.
Qinhuang is professional manufacture for electrolytic cell. We have 3 types hot cell Electrolyzer for alkaline drink water.
Product usage introduction
1, water requirements: municipal pipe network tap water
A, conductivity <80-120us/cm;
B, hardness ≤5 mg/L;
C, water pressure 0.1-0.2mpa;
D, water intake: 180L/H
2. Technical parameters
A, voltage B, current 2-4A
C, PH>7.5;
D, water yield ratio (acid water and alkali water) 1:1-1:4
3. Method of use
A, vertical installation, inlet down.
B. The other two outlets are respectively drawn out with hoses, one for alkaline water (drinking water) and the other for acidic
water.
C. Connect the positive and negative electrodes of the dc power supply to the two electrodes of the electrolytic cell as per the
upper negative and the lower positive
