Views: 16
Ⅰ. Overview
This product is the latest contemporary international sterilization and disinfection machine, which has the characteristics of wide application, large output, low cost, rapid sterilization and no pollution.It is jointly developed by XIAN Qinhuang Water in conjunction with China Agricultural University,Shandong Agricultural University,Northern Jiaotong University, Chinese Academy of Agricultural Sciences, and Hangzhou Yishan Bangshui Water Treatment Technology Co., Ltd.The generated hypochlorous acid water can be used for hand disinfection, object surface disinfection, space disinfection, fruit and vegetable cleaning and fresh-keeping disinfection,agricultural breeding disinfection, textile surface disinfection, food and tableware disinfection,etc.
Ⅱ.Introduction to the machine
1.This machine is composed of two parts:an electrolyte mixing tank and a hypochlorous acid water generator;
2.The machine shell is made of ABS plastic,which has the advantages of anti-corrosion,anti-rust,sanitation and beautiful appearance.The panel is designed to be detachable, which is beneficial for daily maintenance.The back plate is integrated with the frame, and the overall setting is safe and firm.
3.The electrical control system inside the host is connected with the front operation panel and display screen; a water circuit detection and control system is installed; the main components include metering pumps, electric working tanks, programmable solenoid valves, sensors, etc.
Machine touch screen operation interface
Note: Other display contents are used for the factory setting and debugging of the equipment, please contact the maintenance personnel of our factory for details
Ⅲ.Machine work flow
1.Machine work flow
1) After clicking "Start" (the button is displayed as "Stop" at this time), the metering pump is turned on.The electrolysis starts after 3 seconds, the electrolysis current is normal and after 3 seconds, the water inlet solenoid valve opens, and the normal water production starts.If the electrolysis current is abnormal and the current tracking delay time is up to the alarm,it will display "abnormal current" and stop.
2) After starting and stopping, check the liquid level of the dosing tank. If the liquid level is low and lasts for 3 seconds, the machine will alarm "the liquid level of the dosing tank is low" and stop.
3) During the normal water production process, the electrolysis current and the inflow water flow are automatically detected.If it is abnormal and lasts for 3 seconds, it will alarm "abnormal electrolysis current" or "insufficient water flow" and stop.
4) Click this button to stop after the alarm stops and reset the alarm.Click this button at any time after starting to stop and stop water production.
2.working principle
1) Use 150ml of the standard electrolyte (small white bottle) provided by our company to adapt to the electrolysis of this equipment, add it to the mixing tank of this equipment, and then add 3.5 liters of purified water (scale line), and stir evenly.The metering pump is input into the electrolytic cell, and then mixed with tap water for electrolysis.
2) Correspondence table of experimental data (for reference only)
Ⅳ.Preparation before user installation
1. A room that meets household sanitary conditions; equipped with household tap water and sewer pipes
2.The indoor working environment temperature should be at room temperature; with good ventilation; indoor relative humidity should not be greater than 60% during non-working; with good lighting conditions; no strong electromagnetic interference source nearby.
3. A power supply with a load capacity of not less than 200W; the power supply should be equipped with at least one 10A single-phase three-pin power socket, and the grounding end of the socket must be well grounded;
4.There should be fixed tap water pipes and valves in the room; the pressure of tap water source should be 0.1-0.4MPa; the room should have floor drain or sewer channel.
Equipment installation and commissioning
Ⅴ.Host installation
1. After opening the packing box, first check whether the parts are damaged during transportation, and check the parts and spare parts according to the list enclosed in the box.If any damage or inconsistency with the list is found, you must promptly report Carrier and consignor inquiries.
2.Discharge the water maker in a reasonable order.The left, right,and rear panels of the machine should be spaced apart from the wall to facilitate ventilation, operation and daily maintenance.
3.Connect the water pipes according to the graphic interface provided in this manual.
4.The hypochlorous acid water outlet of the host is connected with the user's disinfection water storage tank with pipe fittings.
5.Connect the power cord of the machine to the user's power socket.
Ⅵ.Inspection
1.Check the conditions prepared by the user according to this manual. The conditions provided by the user should meet the requirements. If there is any discrepancy, measures should be taken to solve it. Among these requirements, the pure water quality and power supply system must be guaranteed, otherwise the machine will not work normally or cause an accident.
2.Check whether the installation of each component is correct and reliable; whether the pipe joints of the water system are loose to prevent water leakage; the grounding wire of the box body should be intact and firm, and the grounding end of the power plug should be short-circuited and connected; connecting wires everywhere It should be connected firmly and without damage.
3.Whether the power supply voltage is normal (220V±10%), and whether the electrical plugs, sockets, and terminals are connected correctly and securely.
Ⅶ. Main mechanism water operation
1.Open the user's water inlet on-off valve and water inlet regulating valve;
2.Turn on the main power switch for the user to enter the electrical box.
3.Insert the main unit with leakage protection plug into the user's power socket and turn on the power switch.The machine enters the standby state.
4.Place the liquid water bucket configured according to the above ratio on the water seat of the machine.
5.Press the water control start button on the touch screen operation page. Enter the state of water production and start to produce sterile water. And pour the prepared sterilized water into the external water tank.
6.Adjust the inlet water flow rate to 3.5 liters per minute. (The display shows the flow rate);
7.When the liquid storage bucket detects that there is no water at the low level, the host will alarm for water shortage, and the screen will display the liquid storage bucket alarm flashing, and the machine will stop after a delay of 3 seconds.
8.Adjust the water inlet valve according to the required water quality standards to meet the set value of 1-3.5L/min. The produced hypochlorous acid electrolyzed water is ready for use by measuring the pH value with an instrument to read positive 5-6.5.
9.Turn off water production: When the water production is over, press the "Start/Stop" button on the operation panel, the machine will stop water production and enter the standby state.
